Today I will tell you about the transportation and storage requirements of 20mm Thickness Sheet Mild Steel Checker Plate.
There are many precautions when loading the 20mm Thickness Sheet Mild Steel Checker Plate produced by the manufacturer. When loading, the bottoming or edging should be done first to avoid the deformation of the board due to vibration during transportation.
Generally speaking, the heavier plates should be placed at the bottom, and the thinner plates should be placed on the top as much as possible, so as not to be deformed by the heavy plates.
According to the size and quantity of the board, choose the transportation agency. If the quantity is small and the volume is small, you can choose small and medium-sized express transportation. If the quantity is slightly larger and the volume of the board is slightly larger, you can choose a small and medium-sized logistics company. If the quantity is relatively large, the volume It is also relatively large, and you can choose large chartered logistics.
For the precise 20mm Thickness Sheet Mild Steel Checker Plate, it should be equipped with a special storage rack. The material of the storage rack should be wood or carbon steel brackets. The surface of the carbon steel brackets should be painted or padded with rubber pads, so as to avoid It is confused with plate.
When storing, the storage location should be convenient for lifting, and the storage location should have certain protective measures to avoid moisture, oil and dust affecting the board.
In order to avoid scratching the surface of the steel during transportation, special slings, such as slings, should be used during hoisting, and wire ropes cannot be used.
20mm Thickness Sheet Mild Steel Checker Plate is an extremely versatile sheet, but if it is transported and stored improperly, it may cause sheet deformation, rust, and surface damage, so both manufacturers and customers need to pay attention to its transportation and save.